Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Fig. 1
2200
220
3
20
EN
ATTENTION: Do not forget to use adequate plugs
to the support brackets. Enquire after the
manufacturers. Do an embedding if necessary.
The manufacturer accepts no responsibility in
case of a faulty hanging due to the drilling and
the setting up of plugs in the ceiling.
2115
606.75
170
108.25
258.5
7
8
220
498.5
901.5
• LAYING OUT BEFORE FITTING THE HOOD
1) Mark the centre of the cooking appliance onto the ceiling with a plumb
line. Draw the horizontal axes running parallel to the stove top onto the
ceiling and as illustrated Fig. 1 & 2 mark the positions on the ceiling for :
- The 2 for Ø 10 mm nuts and bolts.
- The cut-out Ø 170 mm for the ducting Ø 150 mm in the extraction
mode when ducting runs through the ceiling and for the 3-core mains
cable.
- The 4 hole centres of the hood bracket item B
- The 2 hole centres of the chimney bracket item D.
2) Drill the different holes with the appropriate masonry bit.
Fig. 3
606.75
108.25
258.5
220
DESSOUS HOTTE
498.5
D
10
258.5
4
Publicité
