Publicité
Les langues disponibles
Les langues disponibles
- The indicator light turns on and off when the appliance reaches the set
temperatures.
- The base has an anti-tipping switch, which allows the appliance to run while the fan
heater is correctly positioned (when correctly placed you will hear it "click") but
stops operation if the appliance tips over.
- safety device: when included it stops operation in the event of overheating. To
restore operation, remove the plug from the mains and wait for it to cool (about 20
minutes) and insert the plug into the plug point and turn on again.
To use the fan heater, proceed as follows:
1)
Plug into the socket.
2)
Adjust the thermostat knob (C) to the required ambient temperature.
3)
Turn the appliance on by turning selector switch (B) clockwise to the required
setting.
4)
To switch off the appliance: turn the selector to (
about 3 minutes in order to cool down the element (doing so will increase
durability), then turn the fan off by turning the knob to "0" (off). Lastly, always
remove the plug from the mains.
If the appliance is not being used for long periods of time, remove the plug from the
plug point.
Antifreeze device
Plug the appliance into the mains, turn the selector switch to "
thermostat knob to the antifreeze position (•): this allows for turning on the fan heater
when the ambient temperature drops below +5°C.
type HF201 with 24-hour timer (Fig. 2)
The appliance comes with a selector switch, thermostat, 24-hour timer, indicator
light, tipping switch, right-left swing function. The functions listed above are
described in the previous section; the timer is used to control "on" and "off" times
over a period of 24 hours, and repeat them systematically every day.
The timer (D) is on when button (E) alongside it is set to "
is excluded.
Right-left oscillation: press the oscillation button to allow the appliance to swing from
right to left.
To operate the fan heater, follow points 1 and 2 in the previous section. In addition:
a) Running the appliance without the timer
a1)
Turn the switch to "
a2)
To turn the appliance off, turn the selector to "0" and remove the plug from the
mains.
b)Running the appliance with the timer (button pos
b1)
Set the correct time: turn the timer disc in the direction of the arrow, matching
the correct time to the reference marker.
b2)
The on/off functions are adjustable using the sliders on the disc: when pushed to
the centre, the appliance stays off, when pushed towards the outer edge of the disc, it
turns on; slide the button to position it in either position (1 slider corresponds to 30
minutes).
(button pos. "I").
" or "
"; the appliance turns on.
15
), allow only the fan to run for
". When set to "I" the timer
.
).
" and turn the
Publicité
