Battery Pack Charging Times; Battery Pack Protective Functions - Busch+Müller IQ-XM speed Notice D'utilisation

Phare à del avec fonction feu de route
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

8.2. Battery pack charging times

With original mains adapter from Busch + Müller: abt. 5 hrs
With other USB adapters / with USB port on a PC: up to abt. 12 hrs
We do not assume any liability when third-party mains adapters are used.
!
The battery pack
2
As soon as a device to be charged is connected via the USB port, the charging process begins.
If the battery capacity falls below a certain level, the power bank function is automatically deacti-
vated because the light function has priority.
!
Tip to preserve the battery pack
the battery pack
2
preferably in a cool and dry environment as well as with approx. 30 - 50
% residual capacity. If the battery pack
charged again, the battery pack
extinct during charging.

8.3. Battery pack protective functions

Protection against overheating: As soon as the temperature of the battery pack
70°C, all outlets are deactivated for approx. 60 minutes to prevent overheating. Also, charging
the battery pack
is not possible in this situation.
2
Overcharge protection: If the battery pack
supplied into the battery pack
avoid damage.
Short-circuit protection of the power bank: If more than 2 A are supplied to devices to be
charged by the power bank, the power bank function is temporarily deactivated to avoid damage
to connected devices. This function is automatically reactivated after approx. 4 minutes.
Short-circuit protection of the light output: If more than 5 A (incl. power bank) are supplied
when connecting a device to be charged, the light output is deactivated to protect the connected
headlight
and the power bank. This function is automatically reactivated after approx. 4
1
minutes.
can provide up to 4,200 mAh with max 2 A as a power bank.
: When not in use over an extended period of time, store
2
is discharged to below 10% capacity and then fully
2
recalibrates itself. Calibration is complete when all LEDs are
2
2
, the USB port
2
is charged to 100 %, or if excessive voltage is
automatically switches off for a short time to
9
2
exceeds
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

168/35la-01

Table des Matières