Busch+Müller IQ-XM speed Notice D'utilisation page 25

This is especially important when cycling on uneven terrain.
Headlight alignment
Align the bicycle headlight
pletely flat road, the horizontal light edge (cut-off line) must always be visible on the road!
Fig.: Example of headlight alignment
Do not use the bicycle if the light beam of your headlight
WARNING
headlight is too loose.
1
Only align or tighten the bicycle headlight
Blinding oncoming traffic can lead to accidents. Before aligning the bicycle headlight
the bracket retaining screw. Make sure to retighten this screw again after aligning the headlight
so that neither the screw nor the headlight can come loose or move all by themselves.
Never look directly into the light of the bicycle headlight when switched on
WARNUNG
in a way to ensure that oncoming traffic is not blinded. On a com-
1
when the bicycle is not moving.
1
Caution: Ensure glare-free alignment
of the headlight!
Cut-off line
1 is misaligned or the
1 , loosen
.
1
25