HEIDENHAIN EIB 5000 Mode D'emploi page 59

8 Removal and disposal
8.1 Removal
The following steps must be performed only
by qualified personnel.
Further information:
Page 39
Depending on the connected peripherals, the product may
need to be removed by an electrical specialist.
In addition, the same safety precautions that apply to the
mounting and installation of the respective components
must be taken.
"General safety precautions",
Further information:
Page 41 and following
Removing the product
To remove the product, follow the installation and
mounting steps in the reverse order.
"Mounting", Page 45
Further information:
Further information: "Installation", Page 47
Storage after removal
If the product is stored temporarily after removal, the
information on repackaging and the specified ambient
conditions must be complied with.
Further information: "Repackaging and storage", Page 43
Further information: "Specifications", Page 60
HEIDENHAIN | EIB 5000 | Operating Instructions | 11/2020
"Personnel qualification",
8.2 Disposal
Incorrect disposal of the device!
Incorrect disposal of the device can cause
environmental damage.
Do not dispose of electrical waste and
electronic components in domestic
waste
Forward the device to recycling in accor-
dance with the applicable local disposal
regulations
If you have any questions about the disposal of the
device, please contact a HEIDENHAIN service agency
NOTICE
59