Publicité
Les langues disponibles
Les langues disponibles
4
Before You Start
The instructions in this guide apply to:
AXIS 5500
AXIS 5550
with firmware version 6.40 (and higher).
The following operating systems are covered in this guide:
• Windows (98, Me, NT, 2000, XP)
• Mac OS X
• UNIX/Linux
The instructions in this guide are based on the settings found in a new and
unconfigured AXIS 5500/AXIS 5550.
To reload the default parameters, you can perform a Factory Default, which will restore most
settings to default values. See The Test Button on page 29 for instructions.
Note:
Installation instructions in this book cover the above operating systems over TCP/IP. For installation
instructions for Windows over NetBIOS/NetBEUI, NetWare over IPX/SPX and IP, and older versions of
Macintosh, as well as instructions on setting an IP address using
5550 User's Manual, located on the AXIS Network Product CD (version 1.3 or later) and www.axis.com
AXIS 5500/AXIS 5550 User's Guide
see the AXIS 5500/AXIS
RARP and BOOTP,
Publicité
