Publicité
Les langues disponibles
Les langues disponibles
18
Important!
•
Make sure that the Automatically detect and install my Plug and Play printer checkbox is not checked.
•
Press F1 to access the Windows online help system if you need additional help when installing a printer/print
server using this method.
•
If you wish to print over LPR, double-click the installed printer from Start | (Settings) |Printers (and Faxes).
Select Properties from the Printer menu and click Ports then Configure Port. Click the LPR radio button and
enter the queue name under LPR Settings. The available queues are:
AXIS 5550: pr1, pr3, pr5, pr7= LPT1. Pr2, pr4, pr6, pr8=USB1
AXIS 5500: pr1-pr8= USB1. Click OK to finish.
If the USB port option does not appear:
If the USB port option does not appear when adding printers in Windows 2000 and XP, follow these
instructions to emulate a USB port:
Windows XP:
Go to Start | Printers and Faxes and click the Add a Printer icon to start the Add Printer Wizard. Click Next.
1.
Windows 2000:
1.
Go to Start | Settings | Printers and click the Add Printer icon to start the Add Printer Wizard. Click Next.
Select the Local Printer radio button and click Next. Click the Create a new port radio button and select Standard
2.
TCP/IP Port from the list. Click Next and the Add Standard TCP/IP Printer Port Wizard starts. Click Next.
3.
Enter the name of the print server (Example: AXIS100086 or the IP address) and click Next. Enter the Device
Port you want to use:
5500: choose LPT1
5550: Choose LPT2 for if you are installing a USB port and LPT1 if you are installing a parallel port. Click
Next and Finish.
Select Manufacturer and Printer from the lists. Click Next. Choose whether you want to keep the existing
driver or to replace it. If you already have the printer's driver installed, you will be asked whether to keep it or
to replace it. Click Next.
Supply a name for the printer and choose whether you want to make it your default printer. Click Next.
Choose whether you want to share the printer with other network users. Do you want to print a test page?
Select the appropriate radio button and click Next and Finish.
Go to Start | (Settings) | Printers (and Faxes) and highlight your newly installed printer. Right-click and choose
4.
Properties. Choose the Ports tab (make sure your printer is highlighted) and then Configure Port...Under
Protocol, click the Raw radio button and then define the printer port under Raw Settings - Port Number as
follows:
5500: 9100
5550: USB = 9101, LPT1 = 9100
Click OK and close the window. Print a test page to verify your installation.
Proceed to Print Server Management and Configuration on page 26 for information on supported
management and configuration tools.
AXIS 5500/AXIS 5550 User's Guide
Publicité
