Axis 5500 Mode D'emploi page 11

AXIS 5500/AXIS 5550 User's Guide
2.1 Automatic IP address assignment
If you are working in a Windows network with automatic IP address assignment, your print
server will obtain an IP address automatically when you connect it to the network. You will find
the IP address on the test page you printed out in "Connect the Hardware" on page 9.
Go to Verify access to the print server's web pages, on page 14
2.2 Manual IP address assignment
To establish communication with the TCP/IP network, an IP address must be assigned to your AXIS
5500/AXIS 5550.
Choose the appropriate method of setting the IP address manually:
• AXIS ThinWizard for Windows 2000 and Windows XP. Axis software that assists in setting
the IP address of several print servers simultaneously.
Recommended for large organizations and enterprise networks.
Refer to Print Server Management using AXIS ThinWizard, on page 28
• arp/ping - use this method to set the IP address for each new device individually.
Setting the IP address using arp/ping
Refer to
• AXIS IP JumpStarter - Axis software that locates print servers on your network and
allows you to assign an IP address to them. Recommended for small offices and local
networks. Refer to Setting the IP address using AXIS IP JumpStarter on page 12 for
instructions.
on page 13 for instructions.
11