Putting Into Storage; Maintenance - Gardena 1188 Mode D'emploi

6. Putting into Storage

Storage /
Overwintering :
Disposal :
(in accordance with
RL 2002 / 96 / EC)

7. Maintenance

Replace batteries :
C
E
Clean control panel :
14
The storage location must not be accessible to children.
1. Remove batteries from Soil Moisture Sensor.
2. Store the Soil Moisture Sensor in a dry place protected from
frost.
Important !
Return spent batteries to one of the sales outlets or dispose of
batteries via your municipal recycling collection centre.
Only dispose of battery once discharged.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
Caution : Rechargeable batteries should not be used !
1. Unlock battery cover
coin (or large screwdriver) by
B
turning clockwise and remove
using gentle pressure.
2. Remove battery holder
and insert 2 batteries
(round cells 1.5 V alkaline
type IEC LR14).
When doing so, ensure
correct polarity (+ / -).
3. Insert battery holder
D
so, make sure that cables are not trapped.
4. Insert catch lug
press down battery cover
O-ring is positioned correctly.
5. Relock battery cover
turning anticlockwise.
The control panel should be cleaned when soiled.
No caustic / abrasive cleaning agents should be used.
v Clean control panel with a damp cloth (do not use solvent).
B
with a
C
C
in Soil Moisture Sensor. When doing
D B
of battery cover in housing slot
B
. When doing so, make sure that
B
with a coin (or large screwdriver) by
E
and