Onkyo SBT-200 Manuel D'instructions page 16

Connecting the digital input source
■
Connect the sound bar to the digital input source with the supplied optical digital audio cable, and
press the INPUT button on the sound bar or remote controller to select Digital.
The types of input source and audio format are as follows:
Input Source
OPTICAL IN
Bluetooth
AUDIO IN
Note
If the digital audio output setting is set to PCM on the TV or DVD/Blu-ray Disc player, you cannot
obtain sound field effect of Dolby Digital.
Auto standby/Auto power on
Auto standby
• The sound bar will automatically enter standby mode (the
detected within 15 minutes.
Note
Auto power on function is always activated in standby mode.
Auto power on
• When the
indicator is off, the sound bar will automatically power on if it detects audio signal from
Bluetooth enabled devices.
Audio Format
No input
PCM
Dolby Digital
En-16
AUDIO FORMAT
indicator
Flashes
Off
Lights in blue
Off
Off
indicator goes off) if no audio signal is