Onkyo SBT-200 Manuel D'instructions page 13

OPTICAL IN jack
■
The sound bar's OPTICAL IN (DIGITAL) jack has shutter-type covers that open when an optical plug is
inserted and close when it's removed. Push plugs in all the way.
Note
To prevent shutter damage, hold the optical plug straight when inserting and removing.
Using with the AC adaptor
After checking all the connection have been made correctly, connect the AC adaptor to the DC IN jack,
then to the AC outlet.
1
Plug the AC power cord into the AC adaptor.
2
Plug the AC adaptor cable into the DC IN jack on the sound bar.
3
Plug the AC power cord into an AC outlet.
Note
• Use only the supplied AC adaptor. Using other AC adaptor may cause a malfunction of SBT-200, an
electric shock or fire. The supplied AC adaptor and AC power cord are designed exclusively for use
with the sound bar. Do not connect the supplied AC adaptor and AC power cord to other equipment.
• Place the sound bar near an AC outlet to plug in/out the AC power cord easily.
• During power standby, the
depending on the input source. (OPTICAL IN: Light blue/Bluetooth: Blue/AUDIO IN: Green)
• Unplug the AC power cord from the AC outlet if the sound bar will not be used for a long period of
time.
Make sure to unplug the AC power cord before making any connections.
■
AC adaptor cable
AC power cord
3 3
AC outlet
indicator goes off. If the
2 2
1 1
AC adaptor
En-13
button is pressed, the
DC IN jack
indicator lights