Publicité
Les langues disponibles
Les langues disponibles
Note: Need to leave at least
80mm(3.15") on the stair bottom
Note: Need to leave at least 87 mm
side/93.5mm(3.68") on the stair top
Noe: Need to leave at least 80mm(3.15") on the
(3.43") between the ends of the rail
stair bottom side/93.5mm(3.68") on the stair top
side between the ends of the rail and
and the first hole of each end as shown
4.49
side between the ends of the rail and the first hole
the first hole of each end as shown in
in diagram 12.
of each end as shown in diagram 12.
diagram 12.
MIN
93.5mm(3.68")
MIN
93.5mm
The galvanized insert (B-LV-0209) is
The galvanized insert (B-LV-0209) is
designed for a maximum of 1814.3 mm
designed for a maximum of 1814.3 mm
(71.43") as shown in diagram 13.
(71.43") as shown in diagram 13.
71.43
The railing is designed for a maximum of
The railing is designed for a maximum of
1857.5 mm (72.3") as in diagram 14.
1857.5 mm (72.3") as in diagram 14.
Make the hook(C-LV-0210) close to the side
Make the hook (C-LV-0210) close to the side
Make the hook (C-LV-0210) close to the side
8
8
of railing （ A-UR02 ), and predrill the holes on
of railing (A-UR02 ), and predrill the holes
of railing (A-UR02 ), and predrill the holes
the hook (C-LV-0210) with φ3mm drill, then fix
on the hook (C-LV-0210) with 3mm drill,
on the hook (C-LV-0210) with 3mm drill,
the hook (C-LV-0210) with WJ0020
then fix the hook (C-LV-0210) with WJ0020
then fix the hook (C-LV-0210) with WJ0020
accessories, as shown in diagrm 15.
accessories, as shown in diagram 15.
accessories, as shown in diagram 15.
DIAGRAM 15
DIAGRAMME 15
16
114
MIN
80mm(3.15")
80mm
DIAGRAM 12
DIAGRAM 12
B-LV-0209
1814.3
72.3
DIAGRAM 13
DIAGRAM 13
DIAGRAM 14
DIAGRAM 14
Screw WJ0020
Pre-drill and install the foot blocks
Pre-drill and install the foot blocks
9
9
(I-LV-0217) with screw WJ0020 on the
(I-LV-0217) with screw WJ0020 on the
I-LV-0217
bottom rail as shown in diagram 16. Foot
bottom rail as shown in diagram 16. Foot
blocks should be evenly spaced out
blocks should be evenly spaced out
depending on the length of the final rail and
depending on the length of the final rail and
cannot be installed underneath a pre-drilled
cannot be installed underneath a pre-drilled
baluster hole.
baluster hole.
Note: Top rail is A in diagram 17. The
Note: Top rail is A in diagram 17. The
holes should be facing downwards.
holes should be facing downwards.
Bottom rail is B in diagram 17. The
Bottom rail is B in diagram 17. The
holes should be facing upwards.
holes should be facing upwards.
MIN
DIAGRAM 15
DIAGRAM 15
Screw WJ0020
DIAGRAM 16
DIAGRAM 16
DIAGRAM 17
DIAGRAM 17
36" Hybrid Composite Railing Installation Guide |
１６
Publicité
