Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Problem
The battery seems to
discharge too quickly.
Shutdown and Startup Problems
The Suspend/Resume but-
ton does not work.
The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.
Possible Cause
Possible Solutions
You re running an appli-
Use both the primary battery and an optional second battery
cation that uses a lot of
and/or use a power adapter for this application when at all
power due to frequent
possible.
hard drive or optical
drive access, or use of
a Wireless LAN device.
'
The power savings fea-
Check the Power Options menu settings and adjust according to
tures may be disabled.
your operating needs.
The brightness is turned
Turn down the brightness adjustment. The higher the brightness
all the way up.
the more power your display uses.
The battery is very old.
Replace the battery.
Battery was exposed to
Replace the battery.
high temperatures.
The battery is too hot or
Restore the notebook to normal operating temperature. Charging
too cold.
icon on the Status Indicator panel will flash when battery is outside
of operating range.
Suspend/Resume
Select the "Choose what the power button does" option.
button is disabled.
There may be applica-
Close all applications and try the button again.
tion software. conflict
The boot sequence set-
Set the operating source by pressing the [ESC] key while the
tings of the setup utility
Fujitsu logo is on screen or use the [F2] key and enter the setup
are not compatible with
utility and adjust the source settings from the Boot menu. See
your configuration.
"BIOS Setup Utility" on page 39.
Internal hard drive was
Use the BIOS setup utility or Primary Master submenu, located
not detected.
within the Main menu, to try to auto detect the internal hard drive.
80 - Troubleshooting
Publicité
Chapitres
Table des Matières
Dépannage
