Shutdown And Startup Problems - Fujitsu T4310 Guide D'utilisation

Problem
The battery seems to 
discharge too quickly.

Shutdown and Startup Problems

The Suspend/Resume 
button does not work.
The system powers up,
and displays power on
information, but fails to
load the operating system.
Possible Cause
The power savings features
may be disabled.
You are running an applica-
tion that uses a lot of power
due to frequent hard drive
access or optical drive
access, or use of a Wireless
LAN or Bluetooth device.
The brightness is turned all
the way up.
The battery is very old.
The battery has been
exposed to high tempera-
tures.
The battery is too hot or too
cold.
Suspend/Resume 
button is disabled.
There may be application
software. conflict
The boot sequence settings
of the setup utility are not
compatible with your configu-
ration.
113 - Troubleshooting
Possible Solutions
Check the Power Options menu settings and adjust accord-
ing to your operating needs.
Use a power adapter for this application when at all possible.
Turn down the brightness adjustment. The higher the bright-
ness the more power your display uses.
Replace the battery.
Replace the battery.
Restore the Tablet PC to normal operating temperature.
Charging icon on the Status Indicator panel will flash when
battery is outside of operating range.
Enable the button by going to the Control Panel -> Power
Options Properties and clicking on the Advanced tab. In the
Power buttons area, select the "Change what the power but-
ton does" option.
Close all applications and try the button again.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu. See "BIOS Setup Utility" on page 72.