Tightening Torque - Rechner Sensors Smart paddle Notice D'utilisation

Mounting
Because of the special design, the
position you require (fig. 1). The front surface is not active (fig.2). This means, that the
can touch the wall of the pipe without affecting the measurement. (fig.3).
Fig. 1
Please pay attention, when mounting the
i
does not obstruct the flow.

Tightening torque

In order to prevent damage to the threaded sleeves when mounting the SMARTPADDLE, the maxi-
mum torque should be taken into consideration. Maximum torque = 20 Nm
12
SMARTPADDLE
is very easy to mount. You can mount it in any
Fig. 2
Fig. 3
SMARTPADDLE
SMARTPADDLE
Inactive surface
into a pipe that the sensor