Bond ASHLAND Guide D'utilisation page 9

7. Place propane gas tank (not included) into the
metal stand (J). Make sure the gas tank sits on
the metal stand (J) completely. Turn the
preassembled wing screw on the outer part of
metal stand (J) clockwise to secure the propane
gas tank tightly.
8. Turn the cylinder valve on the tank clockwise to
close the propane tank. Attach the preassembled
regulator from the table top (B) to the cylinder valve
by turning the regulator coupling nut clockwise.
Make sure it is fastened securely and tighten
connections by hand only.
9. Remove the rubber cap on the electronic igniter
(R) by unscrewing and slide battery (M) into
the battery slot. Make sure the positive side of
the battery faces outwards. Screw the
electronic igniter cap (R) over the battery
tightly.
J
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
1-866-771-2663 | Page 9
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
R
M