Publicité
Les langues disponibles
Les langues disponibles
EN
User Manual
Toslink audio splitter
1
Safety Instructions
1.1
General
•
Read the user manual completely and carefully before use.
The user manual is part of the product and contains important
information for correct use.
•
Keep this user manual.
The user manual must be available for uncertainties and passing the
product.
Risk of electric shock:
Voltage-free only when the plug is pulled.
The product has no power switch and may be used only in easily
accessible outlets to quickly remove it in an emergency and after use.
•
In case of emergency, during thunderstorms and after use,
pull the product on its plug housing!
•
Do not open the housing.
•
Do not modify product and accessories.
•
Do not short connectors and circuits.
•
Use product, product parts and accessories only in perfect
condition.
A defective device may not be put into operation, but must be disconnec-
ted from mains and protected against further use.
Target group information:
Not meant for children.
•
Secure packaging, small parts and insulation against acciden tal
use.
Heat storage:
•
Do not cover the product.
•
Keep enough space around all devices for a good ventlation and
free motion and to avoid damages.
1.2
Warning levels
Warnings against hazards that may result in injuries in case of
non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2
Description and Function
2.1
Product
With your Toslink audio splitter you can send the digital audio signals from your
source devices to several output devices, so you can use them alternatively without
swapping or rewiring.
•
Clear audio transmission without losses in quality
•
With LED status display
•
Easy to install and use
2.2
Scope of delivery
Toslink audio splitter, power supply, user manual
2.3
Operating elements and product parts
58974
4
1
2
3
Fig. 3: Operating elements
1 DC input
2 LED status display
4 Toslink outputs A,B
5 Toslink outputs 1-4
2.4
Specifications
Toslink audio splitter
Artikelnummer
Inputs
Outputs
Frequency range
Signal to noise ratio (SNR)
Separation
Audio formats
Attenuation
Energy consumption
REV2017-10-9
V1.1
1 2
3
6
5
3 Toslink input
6 Power supply
58974
58975
1 x optical (Toslink)
1 x optical (Toslink)
2 x optical (Toslink)
4 x optical (Toslink)
10 - 22000 Hz
80 dB
90 dB @ 1 kHz
LPCM 2.0 / DTS / Dolby / AES-3
< 0.2 dB/m
max. 0.5 W
Operating and storage tempe-
rature range
Operating Humidity
Storage humidity
Dimensions
Weight
Power supply
Input
Output
Power
Protection class
Dimensions
Cable length
Weight
DC plug
Polarity
Tab. 2: Specifications
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4
Connecting and Operating
•
•
•
•
4.1
Connecting
1.
2.
3.
58975
4.
5.
6.
Fig. 4: Connecting
4.2
Operating
1.
2.
3.
- 3 -
50 x 41 x 21 mm
190 g
100-240 V ~ , 50-60 Hz, 0.3 A
69 x 52 x 25 mm
Risk of injury by stumbling and falling
Mind placing cables in a way, nobody will be disabled and the
cable not be damaged.
Install the system and devices attached to it in a way that persons
cannot be injured, or objects not be damaged for example by drop-
ping or stumbling.
Material damage due to wrong placement and wrong
voltage supply
Only place on non-slipping surface.
Use only the supplied power supply.
Check the scope of delivery for completeness and integrity.
Compare the specifications of all equipment be used and
ensure compatibility
Turn off all equipment before connection.
Connect your source device by suitable Toslink cable to the input
(1) of the Toslink audio splitter.
Connect the inputs of your output devices by suitable Toslink
cables to the Toslink output (4 + 5 depending on used device type)
of the Toslink audio splitter.
Connect the supplied power supply unit into the DC output of the
Toslink audio splitter (1) and after that to a free and well accessible
mains socket.
Audio amplifier
Audio amplifier
DVD
Switch on all equipment.
Turn the volume of all equipment to the lowest level and increase it
carefully.
Select the desired source device/s by switching it/them on and off.
by Wentronic GmbH | Pillmannstraße 12
58974, 58975
0 ~ +80 °C
6-92 % RH
12-90 %RH
88 x 49.5 x 25 mm
198 g
5 V
, 1 A
max. 7.5 W
II
0,46 m
54 g
3.5 x 1.3 mm
positiv
AV Receiver
AV Receiver
Goobay
®
38112 Braunschweig | Germany
Publicité
