Beamz TRUSS P30 Mode D'emploi page 41

• Tüv certification only valid for loading table above.
• The values are characteristic according to Eurocode (European standards). Partial safety factors (1,35/1,5) are considered.
• Interaction of internal forces at connector are considered.
• The table data have no limitation of deflection.
The loads are only valid for static loads. The system is perfect and secured against lateral bucking.
•
All static systems, other than single spans, need an individual structural calculation. Please contact a structural engineer.
•
• The self-weight of the truss system is considered.
• Loading figures are only valid for single spans with supports at both ends.
• The deflection is calculated for a single truss spann.
• Load application occurs directly in the nodes and both framework sides are loaded equally.
• The values are only valid for the single span girders analysed here. Complex structures are not covered by this!
Read the manual before assembling, using and loading the truss.
•
Ø50x2mm
Ø16x2mm
290x290mm