Panasonic CT-30WC14 Manuel D'utilisation page 27

SET UP (cont.)
OTHER ADJ.
Highlight OTHER ADJ. and press VOL
menu field.
Note: While sub sub-menu features are highlighted, press
VOL to adjust or activate.
MODE
AUTO PROGRAM
MANUAL PROGRAM
OTHER ADJ . AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS
PRESS ACTION TO RETURN
• MODE - To select TV (antenna) or CABLE mode
depending on the signal source.
• AUTO PROGRAM - To automatically program all
channels with a signal.
• MANUAL PROGRAM - To manually add or delete
channels.
• AUTO POWER ON - Select SET to power up the TV at
the same time as the Cable box or other components or
select OFF. When this feature is On, Timer functions will
be disabled.
• CHAN BANNER - Select ON to display onscreen banner
when changing channels.
• GEOMAGNETIC CORR - This feature is used to adjust
discoloration of the picture due to earth's magnetic field
in the area.
Procedure
• Press VOL to display adjustment menu.
• Press VOL or VOL
picture.
SET UP
MODE CABLE
AUTO PROGRAM
MANUAL PROGRAM
OTHER ADJ . AUTO POWER ON OFF
CHAN BANNER ON
GEOMAGNETIC CORR
PRESS FOR MORE
PRESS ACTION TO RETURN
• TILT CORRECTION - This feature is used to adjust the
tilt of the picture due to earth's magnetic field in the area.
Procedure
• Press VOL to display adjustment menu.
• Press VOL or VOL
SET UP
OTHER ADJ.
PRESS ACTION TO RETURN
to enter sub sub-
SET UP
CABLE
OFF
ON
FOR MORE
to adjust discoloration in
GEOMAGNETIC CORRECTION
0 - - - - - - - - - - - - - - - - - -
l
K
TO ADJUST
PRESS ACTION TO EXIT
to adjust picture tilt.
TILT CORRECTION
0
K
TO ADJUST
PRESS ACTION
TO EXIT
• IMAGE SHIFT - This feature prevents the image
retention associated with viewing a fixed image for a
long period of time. When this feature is selected (ON),
the image is shifted up/down, left/right in small
increments at turn ON, when changing channels or when
the fixed image is left On for a long time. Selecting ON is
recommended for this feature.
I M O
CON ENUS PERATION
25