Bosch WEU WorkLight Notice Originale page 18

OBJ_BUCH-1229-005.book Page 18 Monday, February 27, 2012 10:31 AM
18 | English
When the cordless worklight is switched off, the charging procedure be-
gins as soon as the mains plug of the charger is plugged into the power
socket.
The battery charge-control indicator 3 indicates the charging progress.
During the charging process, the indicator flashes green. When the bat-
tery charge-control indicator 3 lights up green continuously, the battery
is fully charged.
When not using the battery charger, disconnect it from the mains supply
in order to save energy.
Observe the notes for disposal.
Operation
Initial Operation
Switching On and Off
To switch on the cordless worklight, press the On/Off switch 2 upward
without force.
To switch off the cordless worklight, press the On/Off switch 2 down-
ward without force.
When not using the cordless worklight, switch it off in order to extend the
battery life.
Working Advice
Applicational Possibilities (see figure B)
With the foldable multi-function clip 6, the cordless worklight offers many
applicational possibilities.
– Hang it to a nail or similar via the aperture in the multi-function clip.
– Attach it to the top edge of a door with the special hook mount of the
multi-function clip.
– Position it anywhere as a stand-alone unit with the multi-function clip
slightly opened.
Swivelling the Lamp Head
Depending on application, the lamp head 1 can be swivelled to 200°.
– As an uplight with the lamp head facing upward.
– Swivelled by 90° as a room light.
– With the lamp head swivelled down approx. 45° for anti-glare illumina-
tion of a workplace, e.g. a desk.
1 619 929 K74 | (27.2.12) Bosch Power Tools