Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
2.
Place the bottle basket (5) on the electrical body (8) and place the bottles facing down in the bottle
basket (5). Place the small accessories in the accessories tray (4) and place it on top, covering
everything with the large cover (2). Figure 4.
3.
Turn the sterilizer on by pressing the On/Off (J) button.
4.
Press the Menu (G) button. The screen (9) will display the icon
with a 13 minute cycle. However, the sterilization cycle is complete after the water has evaporated
from the heating plate, after approximately 8 minutes.
5.
Do not remove the large cover (2) until the sterilization cycle has finished. It is recommended to let
the sterilizer cool down for at least 3 minutes after the sterilization cycle has finished.
Disconnect the power cord from the electrical supply. Remove the leftover water from the unit, rinse
the inside of the sterilizer and dry it.
NOTE: Before sterilization, it is important that the bottles and accessories are empty, clean and
completely rinsed.
5.3 WARMING
This device is suitable for heating a baby bottle or a jar of baby food. Remember that jars of baby
food must only ever be inserted after previously removing their lid.
1.
Place the device on a suitably flat surface, making sure that it is out of the reach of children.
2.
Insert the plug (7) into the electrical socket.
3.
Add to the heating plate (6) the volume of water stated in the tables shown below in this section
according to the volume and temperature of the baby bottle/food.
4.
Place the steam cooking tray (14) on the electric body (8), put the bottle in the center of the
steam cooking tray (14) and cover it with the small cover (13), after having removed the handle
(11). Figure 5.
5.
Turn on the appliance by pressing the On/Off button (J).
6.
Press the Menu button (G) twice. The screen (9) will display the icon
running with a 3 minute countdown.
7.
The warm-up time can be adjusted from 1 to 6 minutes using the Reduce - (H) or Increase + (I)
buttons, following the tables shown below.
NOTE: To prepare a bottle with formula, it is advisable to heat the water between 70°C and 80°C
before preparing the mixture. To do this, select the function
four times. The unit will start running with a 10 minute countdown. The heating time in this case
can be adjusted from 5 to 15 minutes using the Reduce - (H) or Increase + (I) buttons, following the
indicated tables for HEATING THE WATER FOR FORMULA.
WARMING MATERNAL MILK AND BABY FOOD
Heating table for plastic baby bottles
BOTTLE VOLUME
90ml
120ml
150ml
180ml
210ml
STARTING
TEMPERATURE OF
CONTENTS
20°C
4°C
20°C
4°C
20°C
4°C
20°C
4°C
20°C
4°C
and the unit will start to function
by pressing the Menu button (G)
WATER IN THE
WARMER
30
30
40
35
20
35
20
40
25
40
16
and the unit will start
WARMING TIME
2'
3'
2'
4'
3'
4'
3'
4'
3'
4'
Publicité
