Hitachi RAK-18PSA Mode D'emploi page 26

SLEEP TIMER OPERATION
Configuring the fan speed appropriate for sleeping and stop the operation at specified time.
The display below indicates sleep timer which is set for 2 hours at 23:38 and the turn off time will be 1:38.
Combination of Sleep Timer and On Timer operation
Set the operation to auto stop by sleep timer operation, it can be set to start the operation next morning by
(ON TIMER). Set (ON TIMER) first and then press the
The display below indicates
Press the (SLEEP) button.
Every time you press the
as shown below.
Preset time of sleep timer and the time at which the operation stops
will be displayed on the remote controller.
Fan speed remains "SILENT" during sleep timer operation.
CANCEL
Press the
(ON TIMER) which is set at 6:00
Preset the (ON TIMER).

(Page 17
)
Press the (SLEEP) button.
The unit will turn off in 2 hours (at 1:38)
and will turn on in order to reach the preset

temperature by 6:00.
The time range of sleep timer operation should
be set before
– 20 –
(SLEEP) button, the mode will change
Cancel the sleep timer
(SLEEP) button or (STOP) button.
(SLEEP) button.
and 2 hours sleep time at 23:38.
(ON TIMER) time.