Hitachi RAK-18PSA Mode D'emploi page 12

AUTOMATIC OPERATION
Based on the room temperature and outside temperature, the unit determines the most suitable operation
mode (heating, dehumidifying or cooling) and a comfortable temperature. (Set the current time on the remote
controller before starting operation.)
AUTOMATIC OPERATION
Performs heating operation when the room temperature is below 23°C.
Heating
Set the temperature to be around 23°C.
Performs dehumidifying operation when the room temperature is 23~26°C.
The preset temperature will be the room temperature at the time of start of air conditioner
Dehumidifying
operation.
Performs cooling operation when the room temperature is above 27°C.
Cooling
Set the temperature to be around 27°C.
Even if dehumidifying operation is set, the air conditioner may not execute dehumidifying if the room humidity
is not very high. This is not a malfunction.
Press the (AUTOMATIC OPERATION) button

to set the operation mode to auto.
Press the (STOP) button.
STOP
A short beep sound LV HPLWWHG and the
DXWRPDWLF operation stops.
– 6 –