Chauvet Professional 4BAR Flex Guide De Référence Rapide page 2

4BAR™ Flex QRG
About This
Guide
Disclaimer
Safety Notes
Contact
What Is
Included
To Begin
The 4BAR™ Flex Quick Reference Guide (QRG) has basic product
information such as mounting, menu options, and DMX values. Download
the User Manual from
The information and specifications here are subject to change without notice.
CHAUVET® reserves to right to revise or reissue this QRG.
These Safety Notes include important information about product mounting,
use, and maintenance.
• This product is not intended for permanent installation.
• ONLY connect this product to a grounded and protected circuit.
• DISCONNECT the 4BAR™ Flex from power before cleaning or
replacing the fuse.
• DO NOT look at the light source when the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power cord by pulling on the cord.
• When mounting this product overhead, ALWAYS use a safety cable.
• DO NOT allow flammable materials close to the product when it is
operating.
• DO NOT touch the product's housing when it is on because it will be hot.
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• The voltage of the outlet to which you are connecting this product must be
within the range stated on the decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire or
shock, do not expose this product to rain or moisture.
• Always mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the unit's housing are blocked.
• Never connect this product to a dimmer or rheostat.
• Replace the fuse with the same type and rating.
• ONLY carry this product by the hanging/mounting brackets.
• The maximum ambient temperature is 104° F (40° C). Do not operate this
product at higher temperatures.
• In the event of a serious operating problem, stop using immediately.
• DO NOT open this product. It contains no user-serviceable parts.
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit
contact information.
• 4BAR™ Flex
• Power Cord
• Carrying Case
Unpack your 4BAR™ Flex and make sure you have received all parts in
good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
www.chauvetlighting.com
• Footswitch
• Warranty Card
• Quick Reference Guide
2
for more details.
www.chauvetlighting.com
EN
for