Connect A Battery - GRAUPNER SJ Ultra Twin 40 Instructions D'utilisation

NiMH NiMH
+ +
_ _
30
9. Connect Tx/Rx battery
LiPo with balancer LiPo with balancer

Connect a battery

NiMH NiMH
Output 1 Output 1
LiPo with balancer LiPo with balancer
+ +
_ _
3S 3S
2S 2S
1S 1S
GND GND
black black
3S 3S
2S 2S
1S 1S
Balancer connector output 1 Balancer connector output 1
NOTE: the black wire of the
balancer plug (-) must al-
ways be connected to PIN0
(GND), regardless of the number of
cells in the pack, and thus the num-
ber of wires at the balancer plug.
3S 3S 1S 1S
2S GND 2S GND
black black
Balancer connector output 1 Balancer connector output 1
NOTE: the black wire of the
balancer plug (-) must al-
ways be connected to PIN0
(GND), regardless of the number of
cells in the pack, and thus the num-
ber of wires at the balancer plug.
Manual ULTRA TWIN 40
GND GND
black black