Maintenance & Storage - Kokido TELSA 10 Manuel D'emploi

CAUTION! Replace the damaged filter bag immediately before the next operation.
3. Clean out the debris and rinse the filter bag with splashing water. If brushing is
deemed necessary, use only a soft brush to clean it gently and carefully.
4. Reverse the previous steps to re-assemble the filter bag and then the front cover.
Make sure the front cover is well secured on the main opening body and that no gaps
are visible before the next operation.
MAINTENANCE & STORAGE
NOTE:
1. Battery discharges on its own during storage. Make sure to fully-charge the pool
vacuum before storage.
2. You must re-charge the battery at least once every three months when it is not in
use.
Unplug the external adaptor from socket and then unplug the adapter jack from the
charging base.
Detach accessories from the pool vacuum. If necessary, rinse the pool vacuum and
accessories with fresh water. DO NOT use detergent.
Make sure to drain the water from the unit, handle and pole connector.
Use a damp cloth to clean and dry the pool vacuum and its accessories.
Store them in a well-ventilated area away from the sunlight, children, heat, ignition
sources, and pool chemicals. Ambient temperature for storage should be 10˚C –
25˚C (50˚F – 77˚F). NOTE: A higher temperature may reduce the battery life during
storage.
WARNING!
Never attempt in any way to disassemble the pool vacuum.
-
Under no circumstances should you attempt to disassemble the pool vacuum and
-
replace the impeller, motor and battery by yourself.
12