Before Use - EUROM FLOW SP400i Instructions De Service

Description
(model may vary slightly)
1. handle
2. electrical cable with plug
3. aeration valve
4. float switch attachment
5. hose connector
6. float switch
7. curved fitting
8. suction openings

Before use

Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
Hose connection
Screw the curved fitting (supplied) to the pump, with the opening upwards, as in
the above photo. Now connect the hose connector to the fitting.
The hose connector narrows from 32 to 25 mm. If you are exclusively using a 32
mm hose, you can remove the remaining piece of the fitting with a saw. Attach the
hose to the appropriate part of the connector with a hose clamp. The best results of
pumping efficiency are achieved with a 32 mm.
15