EUROM FLOW SP400i Instructions De Service page 14

In order to prevent injury, never put your fingers into the suction

opening on the pump when the device is plugged in!
Close supervision is necessary when the product is used near

children, incapacitated persons or pets. The device is not suitable for
use by persons (including children) with a physical, sensual or
mental limitation or a lack of experience and knowledge, irrespective
of whether they are being supervised or have been issued with
instructions in relation to the use of the device by a person who is
responsible for their safety.
Keep out of reach of children and never leave them unsupervised

with the appliance. Consequently, when selecting the location for
your machine, do so in such way that children do not have access to
the appliance. Always ensure that children cannot play with the
device.
Never repair the pump, cable and/or plug yourself; always have this

maintenance carried out by an authorised expert. The importer and
manufacturer accept no liability for repairs and/or modifications to
the pump if they have been carried out by someone who is not
qualified to do so. Such interventions also nullify the guarantee.
Where can the pump be used?
This submersible pump has been designed for private usage in or around the home
and garden.
Submersible pumps are primarily used for draining water, moving water and
emptying water reservoirs, cellars, boats etc., and also for temporary circulation of
water.
Note: these pumps may not be used in a swimming pool!
The pumps are completely watertight and can be submerged in liquid with a
maximum depth of 5 or 7 metres (see technical specifications).
The submersible pump is suitable for use with the following liquids:
Type SPi: clean water and soapy water
Type SPV and SPVi: clean and lightly soiled water and soapy water
Corrosive, lightly flammable or explosive liquids (such as petrol, diesel, paraffin,
thinners etc), fats, oil, salty or contaminated water from toilets etc. cannot be
pumped! Bear in mind that sand and all other abrasive and corrosive substances
will increase wear and tear and impact upon the effectiveness of the pump.
The temperature of the pumped liquids must not exceed 35°C.
This pump is not suitable for continuous use, such as the continual circulation of
water. This type of use will substantially shorten the pump's life expectancy.
14