Specifications; Intent Of Use; Tool Specification; Tool Dimensions - Stanley 71501 Manuel

O R I G I N A L I N S T R U C T I O N

2. SPECIFICATIONS

2.1 INTENT OF USE

The 71501 Module is principally a piston and cylinder assembly. When coupled hydraulically to a compatible hydraulic
power source and the relevant nose assembly is attached, it is then used to install blind rivets up to 6.4mm (1/4") in
diameter, in Industrial Environments.
The placing module may only be used in accordance with the operating instructions for placing Stanley Engineered
Fastening structural rivets.
DO NOT use under wet conditions or in the presence of flammable liquids or gases.
The safety instructions must be followed at all times.

2.2 TOOL SPECIFICATION

Force: Pull at stated pull pressure
Pressure: Maximum
Stroke: Piston Stroke
Piston Bore Diameter: Minimum
Weight: Without nose equipment

2.3 TOOL DIMENSIONS

All dimensions are shown in millimetres.
SPECIFICATION METRIC
12.9 kN
345 bar
31.75 mm
4.87 mm
0.77 kg
E N G L I S H
IMPERIAL
2900 lbf
5000 PSI
1.25 in
0.19 in
1.70 lbs
7