Uk Declaration Of Incorporation Of Partly Completed Machinery - Stanley 71501 Manuel

O R I G I N A L I N S T R U C T I O N
9. UK DECLARATION OF INCORPORATION OF PARTLY COMPLETED
MACHINERY
We, Stanley Engineered Fastening, Stanley House, Works Road, Letchworth Garden City, Hertfordshire,
SG6 1JY UNITED KINGDOM, declare under our sole responsibility that the product:
Description: 71501 Hydro-Pneumatic Module for Blind Rivets
Model: 71501
to which this declaration relates is in conformity with the following designated standards:
ISO 12100:2010
EN ISO 4413:2010
Technical documentation is compiled in accordance with the Supply of Machinery (Safety) Regulations 2008, S.I. 2008/1597
(as amended).
All relevant basic safety and health protection requirements of the Supply of Machinery (Safety) Regulations 2008, S.I.
2008/1597 (as amended) are complied with up to the interface cell described in the operating instructions, Section 3 and 4.
The undersigned makes this declaration on behalf of STANLEY Engineered Fastening
A. K. Seewraj
Director of Engineering, UK
Avdel UK Limited, Stanley House, Works Road, Letchworth Garden City, Hertfordshire,
SG6 1JY UNITED KINGDOM
Place of issue:
Date of issue:
This machinery is in conformity with
Supply of Machinery (Safety) Regulations 2008,
S.I. 2008/1597 (as amended)
Letchworth Garden City, UK
01-01-2021
EN ISO 11148-1:2011
ES100118-rev 17:2017
E N G L I S H
15