Publicité
Les langues disponibles
Les langues disponibles
Code Retrieval
(BLINK)
8. Refer to the code box to write down
the code for your component within
the Direct Entry section for the
component just programmed.
Sleep Timer Function
This feature allows you to time how long you would like your
TV to stay on anywhere from 1 to 99 minutes. You must keep
the remote in TV mode and leave it aimed to the TV.
Programming the Sleep Timer:
1. Press and release the
TV
key.
2. Press and hold the
SLEEP
LED turns on. Release the
3. Using the number keys, enter the desired time in minutes
(from 1 to 99 minutes maximum). To set the timer to a
number less that 10, press 0 first and then the desired
number. The LED will flash and turn off.
Note:
If you press any keys other than numbers, they will be
ignored.
You have 10 seconds to program the Sleep Timer or
else the remote will exit the program mode and you will have
to restart from step 1-3.
4. Leave the remote aimed at the TV. Once the Sleep Timer is
set, you can continue to use the remote without affecting the
Sleep Timer. However, the remote must be in TV mode and
pointed at the TV to activate Sleep Timer.
Canceling the Sleep Timer:
To cancel the Sleep Timer, press and release the
then
ON/OFF
key.
Using On-screen Menus
This remote cannot access every menu system of all models
and brands of consumer electronic components. However, if
you're successfully programmed the
DVD player, you can access DVD disc menus with the
key.
The
MENU
key will also access TV menu system for most
TVs, as well as some other popular brands. This remote also
supports select satellite receiver menus.
If this remote's
MENU
key doesn't access the menu system
for your component, you'll need to use the original remote to
change menu settings.
Note:
This remote's
MENU
key doesn't support cable box
menu systems and some VCR menu systems.
Accessing a Menu System
1. Make sure your components are
turned on and your TV is set to the
CABLE
TV
VCR
DVD
SAT
component's input.
2. Press the component key on the
remote.
MENU
(BLINK)
3. Press the
light blinks and the component's
menu should appear on the TV screen.
key for 5 seconds, until the
SLEEP
key.
SLEEP
key,
DVD
key to operate a
MENU
MENU
key. The indicator
7
Publicité
