Publicité
Les langues disponibles
Les langues disponibles
Program for combo TV/DVD/VCR -
Direct Entry Method
In order for the universal remote to control your combo, you
must program it with the TV code first, then program the DVD
or VCR code that matches your combo. These instructions
explain the preferred method of programming the remote - the
Direct Entry Method:
1. Manually turn on the combo.
2. Locate the enclosed combo Code List.
Find your brand of TV and DVD or
VCR.
CODE
INDICATOR
Note: If your brand isn't listed, use the
SEARCH
LIGHT
manual Code Search methods
to program this remote control.
3. Press and hold the
key until the indicator light comes on.
TV
(BLINK)
Then release the
4. Press and release the
indicator light will blink and then
remains lit.
5. Use the number keys on the remote
1
2
3
to enter the first code listed for your
brand.
4
5
6
After you entered a three-digit code,
7
8
9
(OFF)
the indicator light turns off.
Note:
0
LED will flash rapidly for 2 seconds.
Start over at step 3.
6. Aim the remote at your TV and press
ON OFF
the ON/OFF key. If your TV turns off,
you have found the correct code.
7. Enter the code in the box provided on
this page for future reference.
8. If your TV doesn't turn off, repeat steps
TV CODE
3-6 above, entering the next code for
your brand.
9. Repeat steps 3-6 above to enter the
code for the DVD or VCR under
or
VCR
If none of the codes work or your brand
is not listed, use other Code Search
DVD or VCR
methods to program this remote.
NOTE:
press the
press the
CODE SEARCH
CODE SEARCH
TV
key. The
If you enter an invalid code, the
DVD
key.
To control the TV of your combo,
TV
key. To control DVD or VCR,
DVD
or
VCR
key.
key.
5
Publicité
