Jumbo URC-151 Mode D'emploi page 2

Key descriptions
INPUT: selects the video input of your TV if equipped with
this feature.
CLEAR: Removes on-screen display to return to normal
viewing (for some TVs).
Program for TV - Direct Entry Method
In order for the universal remote to control your TV, you must
program it with the TV code that matches your TV. These
instructions explain the preferred method of programming the
remote - the Direct Entry Method:
1. Manually turn on the TV.
2. Locate the enclosed TV Code List.
Find your brand of TV.
CODE INDICATOR
Note:
SEARCH LIGHT
the manual Code Search methods
to program this remote control.
3. Press and hold the
key until the indicator light comes on.
TV (BLINK)
Then release the
4. Press and release the
indicator light blinks and then remains
lit.
5. Use the number keys to enter the first
1 2 3
code listed for your brand.
After you enter a valid three-digit code,
4 5 6
the indicator light turns off.
7 8 9
(OFF)
Note:
LED will flash rapidly for 2 seconds.
0
Start over at step 3.
6. Aim the remote at your TV and press
the ON/OFF key. If your TV turns off,
ON OFF
you have found the correct code.
7. Enter the code in the box provided on
this page for future reference.
8. If your TV doesn't turn off, repeat steps
3-6 above, entering the next code for
TV CODE
brand.
If none of the codes work or your brand
is not listed, use other Code Search
methods to program this remote.
Program for VCR - Direct Entry Method
In order for the universal remote to control your VCR, you
must program it with the VCR code that matches your VCR.
These instructions explain the preferred method of
programming the remote - the Direct Entry Method:
1. Manually turn on the VCR.
2. Locate the enclosed VCR Code List.
Find your brand of VCR.
Note:
CODE INDICATOR
SEARCH LIGHT
the manual Code Search methods
to program this remote control.
3. Press and hold the
key until the indicator light comes on.
Then release the
VCR (BLINK)
4. Press and release the
indicator light blinks and then remains
lit.
5. Use the number keys to enter the first
code listed for your brand.
After you enter a valid three-digit code,
the indicator light turns off.
Note:
LED will flash rapidly for 2 seconds.
Start over at step 3.
2
If your brand isn't listed, use
CODE SEARCH
CODE SEARCH key.
TV key. The
If you enter an invalid code, the
If your brand isn't listed, use
CODE SEARCH
CODE SEARCH key.
VCR key. The
If you enter an invalid code, the