Télécharger Imprimer la page

Star Ultra Max UM1854-NATCE Instructions D'installation Et D'utilisation page 10

Publicité

Please take time to read the following safety
operating instructions. They are the key to the
successful operation of your Ultra-Max Conveyor
Oven.
SAFETY TIPS
For your safety, read before operating.
If you smell gas:
1. DO NOT try to light any appliance.
2. DO NOT touch any electrical switches.
3. Use an exterior phone to call your gas supplier
immediately.
4. If you cannot reach your gas supplier, call the fi re
department.
In the event of a power failure:
1. Turn all switches off.
2. DO NOT attempt to operate the oven until the
power is restored.
NOTE: In the event of a shut-down of any kind,
allow a fi ve (5) minute shut-off period before
attempting to restart the oven.
General Safety Tips:
1. DO NOT use tools to turn off the gas control. If
the gas cannot be turned off manually do not try
to repair it. Call a qualifi ed service technician.
2. If the oven needs to be moved for any reason, the
gas must be turned off and disconnected from the
unit before moving the restraint cable. Reconnect
the restraint after the oven has been returned to
its original location.
3. DO NOT remove the control box cover unless
theoven is unplugged.
OPERATION
To turn the oven on:
1. Push the power switch to "ON."
2. If the burner does not light in one minute, push
the power switch to the "OFF" position and wait
fi ve minutes.
3. After fi ve minutes, retry.
To adjust the time and temperature:
1. Press the DOWN and UP arrows (
same time. Hold for four seconds until the TIME
display goes blank.
2. Press the ENTER button (
TIME and TEMPERATURE.
3. Press the UP arrow (
DOWN arrow (
TEMPERATURE. Hold either button down for
faster display changes.
4. After fi ve seconds, the new numbers will be saved
and the oven will display the new settings.
To turn the oven off:
1. Push the power switch to "OFF." The oven is
equipped with a cool-down feature for motor shaft
and bearing protection. This enables the blower
motor(s) to run regardless of the controller status.
The blower(s) continue to run until the oven cools
to a safe temperature.
To Start:
Push power switch "ON."
If burner does not light in one minute
push the power switch to the "OFF"
position and wait five minutes.
After five minutes, retry.
Adjusting TIME and TEMPERATURE:
1) Press the up and down buttons
(Ý ß) at the same time, hold for four
seconds until TIME display is blank.
2) Press the enter button (
) to
switch between TIME and
TEMPERATURE.
3) Press the up button ( Ý) to increase
or the down button ( ß) to decrease
TIME or TEMPERATURE. Hold
button down for faster display
changes.
4) After five seconds, the new numbers
will be saved and the oven will display
new settings.
10
) to switch between
) to increase or the
) to decrease the TIME or
SWITCH CUTOUT
ON / MARCHE
OFF / ARRÊTE
Pour Commencer:
Poussez le commutateur de puissance à
"MARCHE."
Si le brûleur n'allume pas en une minute,
poussée le commutateur de puissance dans
la position de "ARRÊTE" et attend 5 minutes.
Après cinq minutes, nouvelle tentative.
Ajustement du TEMPS et de la
TEMPÉRATURE:
1) Tenez "vers le haut" et "vers le bas"
boutonne ( Ý ß ) en même temps. Tenez
les boutons pendant quatre secondes
jusqu'à ce que l'affichage de la
TEMPS soit blanc.
2) Appuyez sur le bouton de "entrée" (
pour commuter entre le TEMPS et la
TEMPÉRATURE.
3) Tenez "vers le haut" bouton
augmenter ou "vers le bas" boutonnez
pour diminution de le TEMPS ou
TEMPÉRATURE. Maintenez le bouton pour
des changements plus rapides.
4) Après cinq secondes, les nouveaux
nombres seront sauvés et le four montrera
de nouveaux arrangements.
) at the
)
( Ý ) pour
( ß )
IL1050

Publicité

loading