Publicité
Les langues disponibles
Les langues disponibles
Buttons beep
Choose whether to activate/deactivate the
buttons beep using the
Press the
button to move on to the next
parameter to be configured.
Hours of activity counter
A
The screen in figure B shows the device's
hours of activity.
To reset the counter to zero, press it for a long
time in the area highlighted in the figure.
Press the
button to move on to the next
parameter to be configured.
Firmware version
B
The screen in figure C shows the number of
the firmware version installed on the device.
Press the
button to move on to the next
parameter to be configured.
Replacing batteries
(only on battery-powered model)
C
The flashing
indicates that the batteries must be replaced
within about 1 month.
Note: To save the remaining energy, the
display's back-lighting is deactivated.
The icons
battery charge is not enough to manage the
thermal zone, which is therefore excluded
D
from control E.
WARNING. Failure to replace the batteries in
time may cause damage to the heating system
(anti-freeze protection is no longer guaranteed).
E
arrows A.
icon on the display D
and
indicate that the
Publicité
