NEC Flat MultiSync 77F Mode D'emploi page 8

Controls
–continued
Increases or decreases the curvature of the sides either to the left
or right.
Rotates the entire display clockwise or counterclockwise.
Degauss Control: Eliminates the buildup of stray magnetic fields that
alter the correct scan of the electron beams and affect the purity of the
screen colors, focus and convergence. When activated, your screen
image will jump and waver a bit as the screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse
between uses of the Degauss Control.
This color setting is adjusted at the factory to the stated Kelvin. There
are 3 colors and one user color. Choose your color preference by
pressing the SELECT button on the OSM
3 colors (9300, 7500, sRGB): MultiSync 77F
3 colors (9300, 7500, 6500): MultiSync 97F
Note: sRGB mode provides the suitable color managed picture image. You
can not change Red, Green and Blue colors, brightness and contrast
individually.
: There are 3 background colors (blue, black, and white). To choose
OSM ™
background color, press SELECT button after the selection of OSM in
"Icon select window".
Horizontal Moiré Canceler: Reduces horizontal moiré levels.
Vertical Moiré Canceler: Reduces vertical moiré levels.
EXIT
(MultiSync 77F)
(MultiSync 95F)
Note: If no buttons are pushed after 10 seconds while in OSM, the OSM
menu will automactically disappear.
MS77F97F112701.p65
™
To exit the OSM menu. Select EXIT in "Icon select
window", then push SELECT button to exit OSM menu.
To exit the OSM menu. Select ESC in "Icon select
window", then push SELECT button to exit OSM menu.
6
8
window.
11/27/01, 3:15 PM