NEC Flat MultiSync 77F Mode D'emploi page 12

Specifications
Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
MS77F97F112701.p65
–continued
MultiSync ® 97F
Monitor
Diagonal: 19 inch
18.0 inch
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Unlimited number of Colors
31 kHz to 96 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 153 Hz
832 x 624 @ 55 to 144 Hz
1024 x 768 @ 55 to 120 Hz
1152 x 870 @ 55 to 105 Hz
1280 x 1024 @ 55 to 89 Hz ..................... cites recommended resolution at
1600 x 1200 @ 55 to 76 Hz
356 mm/14.0 inches
Vertical: 267 mm/10.5 inches
366 mm/14.4 inches
274 mm/10.8 inches
AC 100 – 240 V, 50-60 Hz
2.2A @ 100 – 240 V
442 mm (W) x 453 mm (H) x 455 mm (D)
17.4 inches (W) x 17.8 inches (H) x 17.9 inches (D)
22 kg
48.5 lbs
0°C to +35°C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
-20°C to +60°C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
10
12
Notes
90° deflection, 0.20-0.24 mm variable
horizontal mask pitch, 0.24-0.28 mm variable
diagonal mask pitch, medium short
persistence phosphor, multi-layered, anti-
static screen coating, semi-tint screen, Invar
Shadow Mask and OptiClear screen.
®
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
NEC-Mitsubishi Electronics Display
85 Hz for optimal display performance
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
11/27/01, 3:15 PM