PRO-PULSE JL-VWB3-D Mode D'emploi page 21

Inspect the cord regularly and have it replaced by an authorized repair facility if

it is damaged.
Keep the tool dry, clean and free from oil and grease.

Store the tool on a safe and dry place, out of reach of children.

 Do not use cleaning agents or solvents that could attack the plastic parts of the
tool.
Turn the tool off immediately and do not operate until repaired, if tool begins to

make abnormal noise or, vibrations, or produces smoke or burning odour.
An authorized repair centre should do any repairs,modifications, or maintenance

that involve disassembling the tool.
Any damage to the tool should be corrected at an authorized repair centre.

WARNING: Repairs should be made by an authorized repair centre. Opening this
!
tool could invalidate your warranty.
WARNING: RISK OF PERSONAL INJURY. Use only accessories that are
!
recommended by the manufacturer for your model. Accessories that may be suitable
for one tool, may become hazardous when used on another tool.
WARRANTY
Thank you for investing in a PRO-PULSE power tool. These products have
been made to quality standards and are guaranteed for domestic use against
manufacturing faults for a period of 12 months from the date of purchase.
This guarantee does not affect your statutory rights. In case of any
malfunction of your tool (failure, missing part, etc.), please contact one of our
service technicians at our toll free service line at 1-866-206-0888 from 8 AM
to 6 PM, Monday to Friday, Eastern time. RONA reserves the right to repair or
replace the defective tool, at its discretion.
The product is guaranteed for 12 months if used for normal trade purposes.
Any guarantee is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair other than by an authorized
agent. Heavy-duty, daily professional or hire usage are not guaranteed. Due
to continuous product improvement, we reserve the right to change the
product specification without prior notice.
21