Hendi GREEN FIRE Mode D'emploi page 11

2. Slide the rear panel in position between the side panels.
3. Place the elevated grid.
• Never use a high pressure cleaner.
• Maintenance after every use: clean the griddle and elevated grid, clean the dripping tray, grease the grid.
Faults
Fault Possible cause
defective ignition
defective thermocouple
dirty spark plug
burner fails to
defective pressure regulator
ignite at all:
empty gas cylinder
kink in gas hose
clogged jet
If in doubt, please contact your supplier.
Cleaning and maintenance
• Let the appliance cool down before cleaning
• Beware: Never immerse the appliance in water or any
other liquid!
• Clean the outside of the appliance with a damp cloth (wa-
ter with mild detergent).
• The grid and/or baking tray should be cleaned regularly.
Use a special barbecue cleaner and follow the instruc-
tions on its packaging.
• Clean the ventilation slots (if applicable) with a vacuum
cleaner.
• Keep inside after use.
• Let specialised personnel clean the burner at least once
a year.
Fault
burner does not
ignite completely:
Possible cause
gas cylinder (almost) empty
kink in gas hose
gas cylinder valve not entirely
open
clogged jet
defective valve
NL EN
11