Intended Purpose; General Description; Scope Of Delivery - Parts List; Function Description - Grizzly Tools BLSB 3030 Traduction De La Notice D'utilisation Originale

Aspirateur et souffleur de feuilles thermique
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
Check the collection bag regularly for
wear or damages.
Replace worn or damaged parts for
safety reasons. Replace defective
mufflers.
If you need to drain the fuel tank, you
must do so outside.
Treat your device with care. Keep the
tools sharpened and clean, in order to
be able to work better and safer. Fol-
low the maintenance instructions.
Do not try to repair the device your-
self, unless you have professional
training. All work, not mentioned in
these instructions, may only be per-
formed by authorized service repre-
sentatives commissioned by us.
Store the device in a dry place and
out of reach of children. Machines can
be dangerous, if operated by inexperi-
enced persons.

Intended purpose

The device is designed only for the blow-
ing and suction and of dry leaves in pri-
vate households and as a hobby device in
the garden. Every other utilization, which
is not explicitly approved in these direc-
tions, can lead to damage to the device
and represents a serious danger to the
user.
The device must not be employed in ar-
eas where there is health endangering
dusts or as a wet suction device.
The device is designed for use by adults.
Young people over 16 years may use the
device under supervision only. The use of
the device in the rain or in a humid envi-
ronment is forbidden.
The operator or user is responsible for
accidents or damage to other persons or
their property. The manufacturer is not li-
able for damage which is caused through
inappropriate use or incorrect operation.

General description

Scope of delivery - Parts list

Unpack the device and check for com-
pleteness. Dispose of the packaging ma-
terial properly.
-
engine housing
-
two-piece suction pipe
-
blower pipe
-
2 blower attachments
-
neck strap
-
collection bag with feeder pipe
-
fuel mixing canister
-
mounting hardware
-
service key
-
instructions for use

Function description

The garden vacuum has a blowing/
vacuuming unit for the blowing and suc-
tion functions. In blowing mode, you can
quickly blow together fallen leaves or
blown them out of places that are difficult
to reach. In suction mode, the leaves are
shredded to save space, and blown out of
the ejector outlet into the collection bag.
The collection bag is fitted with one-sided
inner lining to prevent fine dust and wet-
ness from penetrating the bag to the out-
side. This lining is located on the left-hand
side of the bag to protect your working
clothes from soiling.
You can vacuum up dry leaves and leaf
parts on the flat with the flat suction noz-
zle. The guide rollers at the lower end of
the tube make it easier to guide the tube
along the ground. For the protection of
the user, the equipment is to be oper-
ated only with the two-part blow/suc-
tion pipe fully fitted.
Refer to the following descriptions for in-
structions on how the operating controls
work.
GB
93

Publicité

Table des Matières
loading

Table des Matières