Trouble Shooting - Grizzly Tools BLSB 3030 Traduction De La Notice D'utilisation Originale

GB

Trouble shooting

Problem
Device doesn't
start
Engine will not
run at expected
maximum power
Excessive
formation of
exhaust fumes/
smoke
Weak or no
suction power/
throughput
104
Possible Cause
On/off switch (2) may be de-
fective
Suction pipe (23) is not prop-
erly installed
Old or incorrect fuel mixture
Fuel tank (16) empty
Incorrect starting sequence
Engine is flooded
Sooty spark plug (38), incor-
rect spark plug gap
Spark plug connection, wires
faulty
Carburettor, carburettor jets
dirty, incorrect carburettor mix
setting
Clogged fuel filter
Sooty spark plug (38), incor-
rect spark plug gap
Dirty air filter (37)
Carburettor, carburettor jets
dirty, incorrect carburettor mix
setting
Old or incorrect fuel mixture
Incorrectly set carburettor-mix
Incorrect fuel mixture
Collection bag (30) is full
Collection bag is dirty
Impeller (9) or suction pipe
(23) is clogged or blocked
Error correction
Repair by Customer Care
Install two-piece suction pipe cor-
rectly, as directed
Empty fuel tank and refuel according
to directions
Refuel
Follow directions on how to start the
engine as described in these instruc-
tions
Let off throttle, start engine several
times, remove, clean and dry the
spark plug if necessary
Clean spark plug, reset or replace it
Replace
Have the carburettor cleaned and
reset by a specialist workshop
Clean or replace the fuel filter
Clean spark plug, reset or replace it
Clean or replace air filter
Have the carburettor cleaned and
reset by a specialist workshop
Empty fuel tank and refuel according
to directions
Have a specialist workshop reset the
carburettor
Refuel according to directions
Empty collection bag
Clean collection bag
Remove obstructions or blockages