Publicité
Les langues disponibles
Les langues disponibles
Grounding Instructions (see Figure 1)
PT-515-120:
– This heater is for use on 120 Volts. The cord has a
plug as show at A (below). An adapter as shown
at C is available for connecting three-blade
grounding-type plugs two-slot receptacles.
The green grounding lug extending from the
adapter must be connected to the permanent
ground such as a properly grounded outlet box.
The adapter should not be used if a three-slot
grounded receptacle is available.
A
Figure 1
Cleaning and Maintenance
– Before cleaning the appliance, disconnect it from
the outlet and let it cool down.
– The enclosure is easy to get dirty. Wipe it often
with a soft sponge. For very dirty parts, wipe
with a sponge dipped in < 122°F water and mild
detergent, then dry the heater enclosure with a
clean cloth. Be careful not to let the water enter
the inside of the appliance
© 2019 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
®
OPERATION (CONT.)
Metal Screw
MAINTENANCE
CONNECTED TO A POWER SOURCE
PT-53-240:
– This heater is for use on 240 (or 208) volts.
The cord has a plug as shown in D (below). No
adapter is available for this blade configuration,
and none should be used. The type outlet is
a 240 (or 208) volt grounding outlet. When
properly installed, it provides a ground
connection through the cord to the heater to
protect the operator from electric shock.
Grounding Methods
C
Grounding Means
B
Grounding Pin
– In order to protect the enclosure, do not splash
water onto the heater, and never use a solvent
like gasoline, isoamyl acetate, toluene, etc. to
clean the heater.
6
D
Turbo Electric Fan Heater User's Manual
Publicité
