Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GML 50 Professional Notice Originale

OBJ_BUCH-1267-003.book Page 22 Monday, March 16, 2015 11:56 AM
22 | English
Cause Corrective Measure
Radio charger inoperative on AC power supply
Mains socket faulty Use another socket
Mains plug or cord defective Check mains plug and cable
and have repaired as re-
quired
Radio charger inoperative on DC power supply
Battery contacts Clean the battery contacts
contaminated (e.g. by inserting and remov-
ing the battery several times)
or replace the battery
Battery pack defective Replace the battery
Battery too warm or too cold Wait until the battery has
(temperature warning k flash- reached operating tempera-
ing or radio charger switches ture
off)
Battery charging or power supply to external devices
inoperative
Mains plug not plugged-in Plug mains plug in
(completely)
Battery not inserted Have battery engage properly
(correctly) for charging in charging compartment
12 V power supply inoperative
No fuse 44 inserted Insert fuse 44
Fuse 44 blown Replace fuse 44
Internal thermal fuse Remove external device and
blown/actuated allow radio charger to cool
down
Radio charger suddenly inoperative
Mains plug or battery not Plug in mains plug or battery
properly or completely properly or completely
plugged in
Software error To reset the software, pull the
mains plug and remove the
battery; wait 30 seconds,
then insert mains plug and
battery again
Bad radio reception
Interference from other de- Position radio charger at oth-
vices or insufficient set-up er location with better recep-
location tion
Rod antenna not optimally Turn/change position of rod
directed antenna
Time indication faulty
Back-up batteries of clock Replace back-up batteries
empty
Back-up batteries incorrectly Insert back-up batteries
inserted (wrong polarity) correctly
1 609 92A 11A | (16.3.15)
Cause Corrective Measure
Remote control inoperative
Battery of remote control Replace battery of remote
empty control
Battery of remote control Insert battery of remote
incorrectly inserted control correctly
(wrong polarity)
Signal of remote control does Turn radio charger so that re-
not reach reception lens 31 ception lens 31 faces toward
the remote control
When the corrective measures do not eliminate an error, please
contact an authorised service agent for Bosch power tools.

Maintenance and Service

Maintenance and Cleaning

 The mains cable is provided with a special safety con-
nection and may only be replaced by an authorised ser-
vice agent for Bosch power tools.
For safe and proper working, always keep the radio charger
and the remote control clean.
Do not immerse the remote control into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the radio charger.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools