7.
Align the plow mount against the skid plate and
mark hole locations to be drilled. Drill plastic skid
plate. See figure 4.
8.
Reinstall plow mount using u-bolts and
fasteners.
MAINTENANCE/CARE
•
Inspect all metal parts on the plow, plow mount, and related hardware. Replace all parts that appears
rusted or deformed prior to use.
•
Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all
nuts and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced im-
mediately.
Contact Warn customer service with installation issues, comments, concerns, and questions.
WARN INDUSTRIES
WARN INDUSTRIES, INC
Customer Service Department
12900 SE Capps Road
Clackamas, OR 97015
1-800-543-WARN (1-800-543-9276)
1-503-722-3005 International Fax
www.warn.com
PAGE 4
Figure 4
85261A0