EDM Product 08761 Manuel D'instructions page 39

Chain saw
Features
Chain lubrication
CAUTION! The device must only be operated with
sufficient chain lubricating oil.
Insufficient lubrication reduces the service life of the
device.
• Check the oil level on the basis of the oil level indicator.
Refilling the chain oil
CAUTION!
• Only add environmentally friendly, good quality chain
lubricating oil to the chain saw.
• Do not add used oil. Used oil can cause skin cancer with
extended and repeated skin contact, and is damaging to
the environment! Used oil does not have the necessary
lubricating characteristics and is unsuitable for chain
lubrication.
• An oil other than the recommended oil can cause
damage to the rail, chain and lubrication system. • Make
sure that no dirt gets into the oil tank.
• Avoid oil spillages. Always wipe up spilled oil.
• Check the oil level indicator (B) to make sure sufficient
chain oil is available for lubrication.
• Unscrew the oil tank cap (A). Before opening, clean the
tank cover and filling nozzle if necessary. • Carefully add the
chain lubricating oil until it reaches the top mark on the oil
level indicator (B).
Checking the chain lubrication
• Start the device (see section "Switching on and off").
• Hold the running saw chain approx. 15 cm above a
suitable surface for a short time. With sufficient chain
lubrication, a light track will appear due to the oil sprayed
from the saw chain.
Switching on the device
WARNING! Make sure the saw chain is not yet applied to
the cut and that no other objects
are touched. Risk of injury!
• Hold the chainsaw firmly with both hands and make sure
that no persons (in particular children) or animals are in the
immediate vicinity.
• Make sure that the chain brake is released before starting
the chainsaw. To do so, draw the hand guard back in the
direction of the bow-type handle.
INSTRUCTION MANUAL
EN
• Press and hold down the switch lock (1).
• Press the on/off switch(2). The chainsaw starts running. •
Release the switch lock(1) again.
• Switching off the device: release the on/off(2) switch.
Caution!
In an emergency, stop the machine by releasing the on/off switch