EDM Product 08761 Manuel D'instructions page 32

Chain saw
Kickback forces can be controlled by the operator, if proper
precautions are taken. Do not let go of the chain saw.
• Do not overreach and do not cut above shoulder height.
This helps prevent unintended tip contact and enables
better control of the chain saw in unexpected situations.
• Only use replacement bars and chains specified by the
manufacturer. Incorrect replacement bars and chains may
cause chain breakage and/or kickback.
• Follow the manufacturer's sharpening and maintenance
instructions for the saw chain. Decreasing the depth gauge
height can lead to increased kickback.
• The first time user should request an experienced operator
in the use of the chainsaw and the protective equipment,
and should be have the initial practice cutting logs on a saw
horse or cradle.
Attention for usage of electric chain saw
• Before any cutting, you must wait for the saw chain
running to reach a stable speed.
• When cutting wood, please do not press the chain saw
with big force.
• During cutting, if the saw chain is stuck in the wood, please
stop the saw immediately, and take
the saw out of the wood carefully. Restart the saw till the
saw chain reaches a stable speed, and
then recut again.
• Operate the machine properly, activate the trigger
completely during use. And do not work
continuously for a long time to avoid overuse fatigue.
Important safety
1 Avoid bar nose contact.
2 Beware of kick back.
3 Do not attempt to hold saw with one hand.
4 Recommended cutting procedure. Hold saw properly
with both hands.
Intended use
This device is specifically intended for sawing wood and
felling trees in private areas, unsuitable for sawing plastic,
masonry or construction materials that are not made of
wood, intended for use in accordance with the descriptions
EN INSTRUCTION MANUAL
and safety instructions in this operating manual.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse.The user /
operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.The
user is liable for all injuries to third parties and damage to
their property.
Please note that our equipment has not been designed for
use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent
purposes.
REF. 08761