SAFETY INSTRUCTIONS
Please read the following instructions
and keep them on hand for later
reference.
Check to ensure the mains voltage
*
matches the voltage on the data plate
of the appliance.
Fully extend the cable and examine it
*
carefully before using it.
Insert the cord plug into a 10/16 A
*
outlet with earthing contact.
If the power cable is damaged, in
*
order to avoid any danger it must
be replaced by
its after-sales service or persons with
similar qualifications approved by
. The device must
be connected to a socket fitted with
an earthing contact.
If you need to use an extension cord,
*
always use a model equipped with
an earthing contact and wires with
section of at least 0.75 mm².
The unit must be supplied by a circuit
*
including a differential residual current
device with an assigned differential
operating current not exceeding
30 mA.
Place the appliance away from curtains
*
and other flammable objects.
Never place the appliance on a hot
*
,
(or potentially hot) surface or near an
open flame.
Never leave the appliance unattended
*
when it is switched on.
30