Machine Specification; Wire Specification; Safety Features; Battery - Senco SRT25 Mode D'emploi

Machine specification

EN
Technical info.
Article no�
Weight
Size (L × B × H )
Wraps per tie
Workpiece thickness
Ties per charge

Battery

Charger
Charging time
Sound pressure level (Lpa) dB
Sound power level (Lwa) dB
Vibration level m/s2

Wire specification

Model
Diameter
Length
Material
Ties per coil
2 wraps
3 wraps
Applications
Tying of re-bars used for: prefab. concrete elements,
on-site concrete constructions, floors and walls.
Tying of floor heating pipes.

Safety features

To increase safety when tying, the rebar tying tool is
equipped with safety features.
WARNING! Before use, make sure that the
!
device works as intended. Otherwise, do not
use the rebar tying tool�
Trigger lock
The rebar tying tool is equipped with a trigger lock�
Lock the trigger and remove the battery when the
rebar tying tool is not in use�
Trigger
Trigger lock
6
SRT25
9VS2003N (EU), 9VS7003N (UK)
2�5 kg
281 × 1 09 × 3 00 mm
2 or 3
8 - 25 mm
+5�000 (3 wraps)
18V 4,0Ah Li-ion
Use only approved battery charger (VB0153EU)�
Full charge = 90 min�
Box: 20 coils (08A20)
Box: 40 coils (08A40)
0�8 mm
approx. 100 m
Galv�
SRT25
approx. 220
approx. 160
SRT40
9VS2002N (EU), 9VS7002N (UK) 9VS2004N (EU), 9VS7004N (UK)
2�6 kg
297 × 1 09 × 3 00 mm
2 or 3
12 - 40 mm
+4�500 (3 wraps)
68,1
79,1
1,5
SRT40
approx. 160
approx. 120
When you start tying, release the trigger lock by
pushing the lock left and upwards.
Curl guide
If you pull the trigger while the curl guide is open, the
rebar tying tool will make a warning sound and refuse
to tie. To start tying, release the trigger and make
sure that the curl guide is closed�
Curl guide
Battery
Durability of the battery
If the battery is fully charged, but the operating time
is significantly reduced, the battery is defective and
must be replaced. If the battery temperature is low
(10°C or lower) the charging time will be prolonged�
WARNING! Do not use defective batteries.
!
The rebar tying tool will not work properly�
SRT58
2�8 kg
312 × 109 × 310 mm
2 or 3
30 - 58 mm
+4�000 (3 wraps)
SRT58
approx. 120
approx. 90