Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
how to operate the appliance
The appliance features internal controls. Check whether the thermostat is off [0]. Check that the voltage in your home
corresponds with the voltage printed on the back of the appliance and plug it in a socket.
TEMPERATURE ADJUSTMENT
Turning the knob to a different setting changes the temperature in the refrigerator.
Available knob settings:
Turning the appliance off - setting 0
Maximum temperature – setting 1
Optimal temperature – setting 2-6
Minimum temperature – setting 7
Setting
Temperature cooling- / freezer
compartment
Set the temperature with the thermostat and choose a setting between 1 and 7. We advise to set the appliance on setting
3 or 4. The appliance now cools continuously until the set temperature has been reached. Do not place anything in the
appliance until the set temperature is reached. This usually takes 3 or 4 hours. Then set the thermostat at the desired
setting and place food into the refrigerator.
Use the highest setting 7 only for making ice cubes or when you put new frozen products in the freezer compartment.
Temperature inside the refrigerator
Do not change the temperature settings due to the change in the season of the year. The ambient temperature increase
will be detected by the sensor and the compressor will be switched on automatically for a longer period of time in order to
maintain the temperature set inside the refrigerator.
Minor changes in temperature
The slight changes in temperature are perfectly normal and may occur, for instance during the storage of large quantities of
fresh products in the refrigerator, or when the door is open for a longer period of time.
This will not affect the condition of the stored food and the temperature will quickly return to its set value.
Note:
The ambient air temperature, how often the door is opened and the position of the appliance can affect the internal
temperature. These factors must be taken into account when setting the thermostat.
ACCESSORY
Ice tray
• Fill the ice tray with water and place it in the freezer compartment.
• After the water has completely turned into ice, you can twist the tray as shown below to get the ice cubes out of the tray.
(least cold)
(most cold)
1
14 / -9
2
3
4
12 / -11
10 / -13
8 / -15
1
5
6
7
6 / -17
4 / -19
2 / -21
English
•
27
Publicité
Table des Matières
