Retrieving Readings - GERATHERM active control Manuel D'utilisation

How to operate the unit

retrieving readings

1. When the monitor is off, please press
"MEM" button to show the average
value of the latest three records.
(note: If the records are less than 3
groups, the LCD will display the recent
record instead.)
note:
EN
The device can record 60 measurements.
2. By pressing again on the "MEM" button, all stored readings can be retrieved. The number of the
stored reading is shown in the bottom left-hand corner. This appears alternately with the time
when the reading was taken. The date is shown underneath.
The most recent record (1) is shown first. Each new measurement is assigned to the first (1) re-
cord. All other records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record
is dropped from the list.
stored value
No. 1
Month and day
SN
SN
Month and day
Time
54